Buy Floor System Now
Click Buy Now
Panel for use with Screed for Underfloor Heating
|Code||Real Panel Dimensions (mm)||Number of Panels Per Pack||Floor space covered by a pack of panels|
|QECF1300||1350 x 850||24||
Preformed sheet of impact resistant molded polystyrene foil
named Kilma Strong. Consists of a thin foil of a thickness of 1 mm
impact-resistant expanded polystyrene, color black.
(It has a highresistance to pressure and tread).
This surface is also characterized by a pattern of pads contoured
for fixing the pipe with a basic geometry squared.
The panels are assembled with each other by interlocking.
Overlap the panels and inserting the molded studs into each other
as per the illustration above
The Kilma-Strong Panel, offers a high resistance to pressure from
The Kilma-Strong panel is used in underfloor heating systems
(for predominantly spiral loop layouts).
FIXING THE PANEL
For fixing to flat surfaces, also of polystyrene, use two-component
glue or non aggressive adhesives against the polystyrene.
Do not use solvent-based adhesives. Alternatively, use mechanical
|Preformed Laminate||Preformed sheet of impact resistant polystyrene foil printed, of a thickness of 1mm|
|Resistance to fire||Euro class 'E'|
* Example only, this is not the only pipe configuration that can be accommodated by the Kilma Strong Pane
Normative references - EEC DIRECTIVES AND STANDARDS RESPECTED
Directive 89/106 / EEC, also called CPD Directive ie "Construction Products", establishes the essential requirements that the construction products must ensure, and it regulates the procedures for the production, labeling and marketing.
MAIN STANDARDS REFERRED TO IN THE DIRECTIVE AND ON THE KILMA CPD-STRONG PANE
|UNI-EN 11925-2:2005||Evidence of fire resistance in construction materials|
|UNI-EN 13501:2005||Fire classification of construction products and building elements|
|"in case of fire" Safety instructions|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrate
Rigid cellular plastics. Determination of compression properties
|QPB16||Bend Former for pipe 603.18.12.|
Kilma Multi-layer TITA-Fix PE-RT Pipe 100M Coil Pipe
Kilma Multi-layer TITA-Fix PE-RT Pipe 250M Coil Pipe
|QEC16||16 x 2 euro cone for connection of pipe to manifold|
|QES608||Edge Insulation LDHE 8mm x150mm x 60 meters with Adhesive|
Conduit Pipe (corrugated sheath protector) 50M Roll 483.25.02
Qualitas reserves the right to make improvements and changes to the product described and to its technical details (supplied only as guide indications) at any moment and without notice: always refer to: the instructions enclosed with the components supplied.
This sheet is an aid, and provided as schematics.
Qualitas assumes no responsibility for the results obtained by using the schematics.